PLURAFLEX®
PLURAFLEX®
Injection hoses for specific requirements when sealing construction joints

Product description

The PLURAFLEX® injection hose system is a joint system for specific requirements when sealing construction joints as planned in civil and structural engineering. Any weak points that occur in the concrete as a result of ruptures or incorrectly sealed areas are compensated for by the provision of injection hoses and subsequent injection of injection material.

Features

  • Multi- and single-compressible
  • Proven in civil and structural engineering and tunnel construction 
  • Easy to handle

Technical details

  • General supervisory test certificate

  • PVC-based injection hose
  • Smooth surface prevents an undesirable bond from forming between the injection hose and the concrete

PLURAFLEX® C11

PLURAFLEX® C11

Injection hose for low-viscosity injection materials: PU resins, PU foams, EP resins. Dimensions: External 11 mm/internal 6 mm.

PLURAFLEX® P11

PLURAFLEX® P11

Injection hose for injection glues, fine cements and low-viscosity injection materials: PU resins, PU foams, EP resins. Dimensions: External 11 mm/internal 6 mm.

PLURAFLEX® P19

PLURAFLEX® P19

Injection hose for Portland cements, injection glues, fine cements and low-viscosity injection material: PU resins, PU foams, EP resins. Dimensions: External 19 mm/internal 11 mm.

PLURAFLEX® C11 aktiv

PLURAFLEX® C11 aktiv

Injection hose with PVC-based waterstop tape for low-viscosity injection materials: PU resins, PU foams, EP resins. Dimensions: External 11 mm/internal 6 mm.

PLURAFLEX® fastening grid

PLURAFLEX® fastening grid

For attaching the PLURAFLEX® injection hoses to the concrete surface.

PLURAFLEX® plastic clip 11/19

PLURAFLEX® plastic clip 11/19

For attaching the PLURAFLEX® injection hoses to the concrete surface.

PLURAFLEX® clip 11/19

PLURAFLEX® clip 11/19

For attaching the PLURAFLEX® injection hoses to the concrete surface. 

PLURAFLEX® joint steel clips types 1 and 2

PLURAFLEX® joint steel clips types 1 and 2

For attaching the PLURAFLEX® injection hoses to the seam sheet (type 1) or to the joint tape (type 2). 

PLURAFLEX® spider fittings I and II

PLURAFLEX® spider fittings I and II

Two-part reinforcement bracket for supporting one- or two-part PLURAFLEX® packers.

PLURAFLEX® packer

PLURAFLEX® packer

Packer for fitting the injection hoses to spider fittings I and II.

PLURAFLEX® nailing packer

PLURAFLEX® nailing packer

Nailing packer for fitting the injection hoses to the formwork.

PLURAFLEX® foam rubber

PLURAFLEX® foam rubber

Foam rubber for adhering to PLURAFLEX® packers. Underside with adhesive film.

PLURAFLEX® injection nipple

PLURAFLEX® injection nipple

Injection nipple for connection to the two-part PLURAFLEX® packers and one-part PLURAFLEX® nailing packers depending on the chosen injection material.

PLURAFLEX® S coupling

PLURAFLEX® S coupling

Sliding coupling for cement injection.

PLURAFLEX® R1/4 adapter

PLURAFLEX® R1/4 adapter

R1/4 adapter for connecting the nailing packers to the S coupling.

PLURAFLEX® PVC filling hose

PLURAFLEX® PVC filling hose

Fabric-reinforced PVC hose for filling the injection hoses.

PLURAFLEX® PVC venting hose

PLURAFLEX® PVC venting hose

Fabric-reinforced PVC hose for venting the injection hoses.

PLURAFLEX® sleeving

PLURAFLEX® sleeving

Plastic hose for connecting PLURAFLEX® C11/P11 to the filling and venting hose.

PLURAFLEX® heat-shrink tube

PLURAFLEX® heat-shrink tube

Heat-shrink tube for protecting the connection between PLURAFLEX® P11 and P19 and the filling and venting hose (red/white PVC).

PLURAFLEX® stopper

PLURAFLEX® stopper

For closing the filling and venting hoses.

PLURAFLEX® coupling

PLURAFLEX® coupling

For connecting PLURAFLEX® C11 to filling and venting hoses.

PLURAFLEX® hose clip

PLURAFLEX® hose clip

For fastening hoses.

PLURAFLEX® high-strength adhesive

PLURAFLEX® high-strength adhesive

For completing the filling and venting hoses with the PLURAFLEX® injection hoses.

PLURAFLEX® Injection hose nozzle

PLURAFLEX® Injection hose nozzle

To be attached to the filling and venting hose.

PLURAFLEX® Injection hose nozzle for the injection nipple

PLURAFLEX® Injection hose nozzle for the injection nipple

Injection nipple to be attached to the injection hose nozzle depending on the chosen injection material.

PLURAFLEX® gas torch

PLURAFLEX® gas torch

For heating the PLURAFLEX® HSS 11 and HSS 19 heat-shrink tubes.

PLURAFLEX® Storing box

PLURAFLEX® Storing box

For storing the filling and venting hoses in the concrete component.

PLURAFLEX® screw packer

PLURAFLEX® screw packer

Continuously rolled M6 thread, which results in higher tensile strength and continuous tightening.

PLURAFLEX® Screw packers for one-day sites

PLURAFLEX® Screw packers for one-day sites

Screw packer for one-day sites with return valve, including pre-break point.

PLURAFLEX® injection material

PLURAFLEX® injection material

Such as moisture-reactive PU foams, type 50 and type 57, two-component injection resins,
type 03P and type 05, three-component 40 injection gel and many more.