ISOPRO® concrete-concrete
ISOPRO® concrete-concrete
Thermal insulation connecting elements with an insulation thickness of 80 mm

Product description

ISOPRO® thermal insulation connecting elements reliably create the non-positive locking connection between external concrete components and internal components. With an insulation thickness of 80 mm, ISOPRO® solves the problem of thermal weak points in the building envelope and by far surpasses the requirements for heat protection. The elements are approved by the building authorities in accordance with no. Z-15.7-243 and Z-15.7-244, and reliably reduce thermal bridges in accordance with DIN 4108-2 supplementary sheet 2 and EnEV (German Energy Saving Regulation).

Features

  • Simple, quick, economical
  • Reduces heating costs
  • Prevents thermal bridges and therefore damage caused by mould and moisture
  • Reduces the heat flow in the frame to a minimum

Technical details

  • Approved by the building authorities and type-tested in accordance with EC2
  • 80 mm insulating body: Made of NEOPOR® with λ = 0.031 W/mK
  • Reinforcement rods: Made of B500B and B500NR
  • Pressure pads: Made of high-strength special concrete

ISOPRO® IP

ISOPRO® IP

Thermally-insulated connection for transfer of negative moments andpositive and negative shearing forces. Version with concrete compression bearings.

ISOPRO® IPT

ISOPRO® IPT

Thermally-insulated connection for transfer of negative moments and positive shearing forces. Version with steel pressure rods.

ISOPRO® IP 2-part

ISOPRO® IP 2-part

Thermally-insulated connection for transfer of negative moments and positive shearing forces. Version with concrete compression bearings. Two-part version for element slabs.

ISOPRO® IP + IPT corner

ISOPRO® IP + IPT corner

Thermally-insulated connection for transfer of negative moments and positive shearing forces. Version with concrete compression bearings. Solution for corner balconies.

ISOPRO® IP VAR. I

ISOPRO® IP VAR. I

Thermally-insulated connection for transfer of negative moments and positive shearing forces. Version with concrete compression bearings. Connection to a wall leading downwards.

ISOPRO® IP VAR. II

ISOPRO® IP VAR. II

Thermally-insulated connection for transfer of negative moments and positive shearing forces. Version with concrete compression bearings. Connection to a wall leading upwards.

ISOPRO® IP VAR. III HV

ISOPRO® IP VAR. III HV

Thermally-insulated connection for transfer of negative moments and positive shearing forces. Version with concrete compression bearings. Connection to a ceiling vertically offset upwards.

ISOPRO® IP VAR. III UV

ISOPRO® IP VAR. III UV

Thermally-insulated connection for transfer of negative moments and positive shearing forces. Version with concrete compression bearings. Connection to a ceiling vertically offset downwards.

ISOPRO® IPQ

ISOPRO® IPQ

Thermally-insulated connection for transfer of positive shearing forces. Version with concrete compression bearings.

ISOPRO® IPZQ

ISOPRO® IPZQ

Thermally-insulated connection for transfer of positive shearing forces. Version without compression bearing for constraint-free connections.

ISOPRO® IPQS/IPTQS

ISOPRO® IPQS/IPTQS

Thermally-insulated connection for transfer of positive shearing forces. IPQS version with concrete compression bearings. Short element for absorbing loads at specific points.

ISOPRO® IPQZ

ISOPRO® IPQZ

Thermally-insulated connection for transfer of positive shearing forces. Version without compression bearing for constraint-free connections. Short element for absorbing loads at specific points.

ISOPRO® IPQQ

ISOPRO® IPQQ

Thermally-insulated connection for transfer of negative and positive shearing forces. Version with steel pressure rods.

ISOPRO® IPTQQS

ISOPRO® IPTQQS

Thermally-insulated connection for transfer of negative and positive shearing forces. Version with steel pressure rods. Short element for absorbing loads at specific points.

ISOPRO® IPH

ISOPRO® IPH

Thermally-insulated connection for transfer of horizontal loads parallel and/or perpendicular to the insulation plane.

ISOPRO® IPE

ISOPRO® IPE

Thermally-insulated connection for transfer of horizontal loads parallel and perpendicular to the insulation plane. In combination with the ISOPRO® elements IP, IPT and IPTD: Transfer of positive moments. Used for earthquakes.

ISOPRO® IPTD

ISOPRO® IPTD

Thermally-insulated connection for transfer of positive and negative moments and shearing forces. Version with tension/pressure rods. Thermally insulated slab connection for transmitting positive and negative bending moments and shearing forces.

ISOPRO® IPTA

ISOPRO® IPTA

Thermally-insulated connection for transfer moments, normal forces and horizontal forces. Used at specific points.

ISOPRO® IPTF

ISOPRO® IPTF

Thermally-insulated connection for transfer of moments, normal forces and horizontal forces. Used at specific points.

ISOPRO® IPO

ISOPRO® IPO

Thermally-insulated connection for transfer of shearing forces and horizontal forces. Used at specific points.

ISOPRO® IPTS

ISOPRO® IPTS

Thermally-insulated connection for transfer of negative moments and positive shearing forces. Version with pressure rods.

ISOPRO® IPTW

ISOPRO® IPTW

Thermally-insulated connection for transfer of negative moments, positive shearing forces and horizontal forces. Version with pressure rods.

ISOPRO® Z-ISO

ISOPRO® Z-ISO

No structural function. Intermediate insulation for support at specific points.

WGV office building Stuttgart

The €34 million new building of Württembergische ...

To the article

Urfahr residential complex Linz

This new residential complex is located in the district of ...

To the article

Former waterworks housing development Graz

This new housing development has been built on the site of the ...

To the article

Muchargasse residential building Graz

The basic concept of this project was to "develop a building that ...

To the article

Stephenson- gasse, Vienna

The residential building company BUWOG constructed the ...

To the article

Wulzendorf- strasse, Vienna

The residential construction project on Wulzendorfstraße ...

To the article

Mainbow Frankfurt

Directly on the banks of the River Main, a modern, ...

To the article

Alleenhof Carré Ludwigsburg

In two building sections, 116 condominiums which are embedded in ...

To the article

PerianderGarten Fürth

In the centre of one of the most beautiful areas of Fürth, ...

To the article

VECTOR Informatik Stuttgart

The innovative technology company from the automotive supply ...

To the article

Winterhafen business park

The showcase project at the Winter dock in Linz involves the ...

To the article

Seeschanze Bregenz

Perfectly situated between the shore of Lake Constance, Bregenz ...

To the article

Star22 Vienna

The Star22 project is the perfect example of a housing ...

To the article

Carnerigasse Graz

Over the course of this project, known as C34, a disused art ...

To the article

Chrystal Park Luxembourg

"Crystal Park", which is 30,000 m² in size, was constructed ...

To the article

Kepler Park Freiburg

Developing a new urban district – taking into account the ...

To the article

Lakeside city "Aspern"

In 2009, work began on Vienna's new urban district – the lakeside ...

To the article

Ulm University Hospital

With more than 315 beds, 15 operating theatres and a floor space ...

To the article

Courtyard Building Masdar City

Since 2008, a new city has increasingly been taking shape in the ...

To the article

Atelier Residence Warsaw

The residential and commercial building Atelier Residence ...

To the article

New urban quarter Limmatfeld

A new district called Limmatfeld has been developed just outside ...

To the article

"Die Schwinge" housing complex Ingoldstadt

The housing complex in Ingoldstadt, which was completed in spring ...

To the article

ISOPRO® concrete-wood

ISOPRO® concrete-wood

The ISOPRO® range is completed by the ISOPRO® thermal insulation elements types HBM and HBQ. They are used to attach freely projecting or supported wooden constructions, and reliably reduce thermal bridges in accordance with DIN 4108-2 and EnEV. ...

ISOPRO® concrete-steel

ISOPRO® concrete-steel

The ISOPRO® thermal insulation elements, types SBM and SBQ, are elements for connecting steel structures to reinforced concrete components. Thanks to the excellent thermal separation of ISOPRO® elements, structural problems at the intersection ...

ISOMAXX® concrete-concrete

ISOMAXX® concrete-concrete

H-BAU further developed the tried-and-tested ISOPRO® balcony-insulating elements, and this resulted in ISOMAXX®. The ISOMAXX® connecting elements reliably create the non-positive locking connection between external concrete components and internal ...

ISOMUR® Plus

ISOMUR® Plus

Thermal bridges caused by geometric and material factors represent a typical weak point in the thermal insulation in the wall-to-base area above the basement ceiling. The ISOMUR® Plus wall base element solves the problem of thermal bridges at the ...